The Magnetic Tool Mat
By GO FOR MEN
Strong enough to hold sockets, bolts and bits,
even on a fender, a hood, or the underside of a car.
Couldn't load pickup availability
Back Guarantee
Fri, May 8
You set the 10mm down for two seconds. Now it is gone. Again.
On the floor, in the engine bay, under the bench. So you stop the job and crawl around with a flashlight while the part you actually needed sits three feet away, laughing at you.
Every wrench, every weekend.
A magnetic mat strong enough that nothing rolls, nothing drops, and nothing walks off.
You put the part down, it stays exactly where you left it.
NEW CUSTOMER OFFER
Extra 10% off, on top of the sale.
Will it actually hold my parts?
Will it actually hold my parts?
Yes. The magnets run the full mat, strong enough to hold sockets, wrenches, bolts and bits, and to keep them there even if you tip the mat on its side or stick it to a vertical panel. Very heavy tools are the exception, this is built for the small stuff that rolls and disappears.
Specs & What's Included
Specs & What's Included
Includes: 3 mats (17" strip, 12" square, 7" round)
Material: flexible PVC with a non-slip back and embedded magnets
Use: lay flat on the bench, or stick to any steel surface
Care: wipe clean with a rag, keep oil and grit off the face
What's it good for?
What's it good for?
Engine work, brake jobs, electronics, watch and bike repair, RC, anything with small metal parts you cannot afford to lose. Drop your screws on it as you remove them and they go back in the same order.
Shipping & Delivery
Shipping & Delivery
We offer FREE, tracked shipping.
Tracking is sent as soon as your order ships.
Typical delivery: 5-7 business days, depending on location.
100 Day Money Back Guarantee
100 Day Money Back Guarantee
If it is not right for your bench, send it back within 100 days for a full refund. No hassle.
Magnetic Tool Mat
"Probably the best tool worth buying in 2026".
Stop crawling around
Every mechanic knows the sound. A socket hits the floor and rolls into the one spot you cannot reach. You waste ten minutes on your knees for a two dollar part. Lay it on the mat instead and it never moves.
Stick it anywhere. It still holds.
Flat on the bench, on the side of the toolbox, on the fender, even upside down under the car. The magnets do not care about gravity.
Your parts stay where you put them until you need them.
Why the lost socket is everyone's problem
Everything you want to know
Holds even upside down
Nothing rolls off
Never lose the 10mm again
Holds even upside down
Nothing rolls off
Never lose the 10mm again
Holds even upside down
Nothing rolls off
Never lose the 10mm again
Holds even upside down
Nothing rolls off
Never lose the 10mm again
Holds even upside down
Nothing rolls off
Never lose the 10mm again
Holds even upside down
Nothing rolls off
Never lose the 10mm again
Holds even upside down
Nothing rolls off
Never lose the 10mm again
Holds even upside down
Nothing rolls off
Never lose the 10mm again
Holds even upside down
Nothing rolls off
Never lose the 10mm again
Holds even upside down
Nothing rolls off
Never lose the 10mm again
Holds even upside down
Nothing rolls off
Never lose the 10mm again
Holds even upside down
Nothing rolls off
Never lose the 10mm again
After one job:
What people notice
0%
94%
Said they stopped losing small parts mid-job.
0%
90%
Keep one stuck to the toolbox or fender now.
0%
98%
Would buy it again for another bench or vehicle.
Not all trays do the same thing.
a bench that holds onto your parts, by design.
| GO FOR MEN | magnetic bowls / trays | |
|---|---|---|
| Holds parts at any angle | ||
| Sticks to vertical steel | ||
| Lay parts out in order | ||
| Will not roll or tip over | ||
| Wraps onto a fender or frame | ||
| Three sizes for any job |
FAQs
Straight answers from people who actually wrench
For additional help please reach out to us at Info@GOFORMEN.com
Collapsible content
Will it actually hold my sockets?
Will it actually hold my sockets?
Yes. The magnets run the length of every mat, strong enough to hold sockets, wrenches, bolts and bits, and to keep them there even on an angle. It is built for the small stuff that rolls and disappears, not for a heavy breaker bar.
Will it scratch my paint or fender?
Will it scratch my paint or fender?
No. The face is soft flexible PVC, so you can lay it straight on a fender or hood and set parts on top without marking the paint.
Can I stick it under the car?
Can I stick it under the car?
Yes. The magnets hold to any steel surface, including the frame or panels under the car, so your parts stay put over your head instead of falling on your face.
What sizes do I get?
What sizes do I get?
Three mats in every set: a 17 inch strip for the bench, a 12 inch square for laying parts out in order, and a 7 inch round that sticks anywhere you need it.
Will the magnets wipe my phone or cards?
Will the magnets wipe my phone or cards?
No. These are standard hold magnets, fine around tools and electronics. Keep them away from old hard drives and credit card strips, the same as you would with any magnet.
How do I clean it?
How do I clean it?
Wipe it down with a rag. Keep heavy oil and grit off the face so the magnets keep their grip. No washing needed.
What if it does not work for me?
What if it does not work for me?
Send it back within 100 days for a full refund. If it does not earn its spot on your bench, you do not keep it.
What Buyers Say
Real reviews from verified buyers
Based on 2,318 reviews
Did a brake job last weekend and not one clip or bolt hit the floor. The strip held every socket as I pulled it. Felt like cheating.
Stuck the round mat to the fender and the bolts just sat there while I worked. No scratches, no rolling, no hunting. Sold.
Does what it says. Heads up, it is one set per pack, I grabbed a second for the other bench.
I lose the 10mm at least once a job. Have not lost it since this showed up. That alone is worth it.
Bought it for my dad who is always on his knees looking for a dropped socket. He loves it, says it is the best thing in the garage.
Stuck one under the car on the frame. Parts stayed up there the whole time. Nothing landed on my face for once.
Magnets are strong. Just know it is for small and medium stuff, not a big breaker bar. For screws and sockets it is perfect.
I do watch and electronics repair. Lay the tiny screws out in order and they stay exactly where I put them. Goes back together easy.
Three sizes covers everything. Strip on the bench, square for the teardown, round sticks to the toolbox. Use all three.